Only new 94Ah i3 will charge 3-phase @ 16A for 11kW output. My car is MY2016 and will only do single phase 32A for 7.2 kw charge.roberto72 ha scritto: Effettivamente hai ragione. Con il caricatore opzionale da 32A monofase anche la BMW I3 carica a 11kW in trifase.
Good source of cables in Italy?
Regole del forum
Parlare di un solo e singolo argomento per discussione, nella sezione più corretta e con un titolo chiaro e descrittivo, evitando i fuori tema | Evitare di citare tutto il testo di un precedente messaggio, ma lasciare solo il minimo indispensabile usando questo sistema | Utilizzare le unità di misura corrette, in particolare i kW per la potenza e i kWh per l'energia, di cui è spiegata la differenza qui | Leggere il regolamento completo che è visibile qui
Parlare di un solo e singolo argomento per discussione, nella sezione più corretta e con un titolo chiaro e descrittivo, evitando i fuori tema | Evitare di citare tutto il testo di un precedente messaggio, ma lasciare solo il minimo indispensabile usando questo sistema | Utilizzare le unità di misura corrette, in particolare i kW per la potenza e i kWh per l'energia, di cui è spiegata la differenza qui | Leggere il regolamento completo che è visibile qui
Re: Good source of cables in Italy?
Re: Good source of cables in Italy?
Hello, I think You don't need resistors or other devices if use Zencar with 3a cable end adaptor, because the EVSE "talk" with the Enel charger so can give power to the car. Pay attention that Tipo 3a provide only 3.7 kwh, at this point look for Type 2 plugs, and use 3a only for emergency
- selidori
- ★★★★★ Ambasciatore
- Messaggi: 20863
- Iscritto il: 14/02/2016, 11:17
- Località: Milano
- Veicolo: EC4...
- Contatta:
Re: Good source of cables in Italy?
Resistor is for network side (to start flow from Tipo3), not for car side (in this case PWM is provided by EVSE, and is only case when car start recharge).Carlo ha scritto:Hello, I think You don't need resistors or other devices if use Zencar with 3a cable end adaptor, because the EVSE "talk" with the Enel charger so can give power to the car. Pay attention that Tipo 3a provide only 3.7 kwh, at this point look for Type 2 plugs, and use 3a only for emergency
Re: Good source of cables in Italy?
Ok, I'm now doing the resistors with a switch for the 3a plug, I see on a schematics there is a diode there, can you please tell me what kind of diode should I use there?
BTW. EVSE without any resistors will not work, the enel coline will not provide power, so selidori is right
BTW. EVSE without any resistors will not work, the enel coline will not provide power, so selidori is right
- andbad
- ★★★★ Esperto
- Messaggi: 2139
- Iscritto il: 23/03/2018, 11:57
- Località: Massa (MS)
- Veicolo: Nissan Leaf 30kWh
Re: Good source of cables in Italy?
You can see at this link:xsherlock ha scritto:Ok, I'm now doing the resistors with a switch for the 3a plug, I see on a schematics there is a diode there, can you please tell me what kind of diode should I use there?
BTW. EVSE without any resistors will not work, the enel coline will not provide power, so selidori is right
cavo-di-ricarica-tipo-1-e-tipo-3a-lato- ... 93-30.html
Long story short: any 1N4xxx diode should work, you can try with 1N4007, at example.
By(t)e
eVe: electric vehicle eVe - Leaf 30kWh 2016
- giuliano.fortunati
- ★ Principiante
- Messaggi: 1
- Iscritto il: 28/07/2018, 16:12
Re: Good source of cables in Italy?
I can suggest you this website: BMW i3 60Ah (7.4 kW) Caratteristiche del Sistema di Ricarica a bordo
http://www.e-station.it/scheda-auto-ele ... -i3-7-4-kw
http://www.e-station.it/scheda-auto-ele ... -i3-7-4-kw